METAR and TAF decoder, group by group
Paste a METAR, SPECI or TAF and read it group by group, in plain words. The decoder lists what each group means, gives the flight category, and points out things worth checking, such as a low ceiling, a small temperature and dew point spread or a thunderstorm group. It runs in your browser and nothing you paste is sent anywhere.
For learning only. The decoder reads text, it does not know the weather. Real flights need a proper briefing, the current report from an official source and your own minimums. The sample reports are invented: the station codes are real aerodromes, the weather is not.
Decode a report
Paste one report, or several, one after another. Choose a sample to see how it works.
How a METAR is laid out
A METAR is a fixed sequence of groups. Once you know the order, any report reads left to right:
- Type and station. METAR (routine, half-hourly or hourly) or SPECI (issued when something changes), then the four-letter ICAO code, such as LROP.
- Time. Day of the month and time in UTC, such as 171230Z for the 17th at 12:30.
- Wind. Direction (true, in degrees) and speed, such as 27008KT. A G adds the gust. VRB is variable, and a group such as 100V180 gives the range it swings through.
- Visibility. In metres, with 9999 meaning 10 km or more. CAVOK replaces visibility, weather and cloud when all are good. US reports use statute miles (SM).
- Weather. Intensity, descriptor and phenomenon, such as -RA light rain, +TSRA heavy thunderstorm with rain, FG fog, BR mist.
- Cloud. Cover (FEW, SCT, BKN, OVC) and height in hundreds of feet above the aerodrome, such as BKN012 for broken at 1,200 ft. CB is cumulonimbus and TCU towering cumulus. The ceiling is the lowest broken or overcast layer.
- Temperature and dew point. In degrees Celsius, with M for minus. The two close together means fog or low cloud may form.
- Pressure. Q followed by QNH in hectopascals, or A followed by inches of mercury in US reports.
- Trend. NOSIG (no significant change expected), or BECMG and TEMPO groups for the next two hours.
A TAF is the forecast for an aerodrome. It has a validity period, such as 1706/1806 for 06:00 on the 17th to 06:00 on the 18th, then the expected conditions, then change groups: BECMG (becoming, a gradual change), TEMPO (temporary fluctuations), FM (from, a rapid change at a stated time) and PROB30 or PROB40 (a 30 or 40 per cent chance).
Flight category
Many services colour a report by flight category, taken from the ceiling and visibility. The decoder uses the common scheme: VFR is a ceiling above 3,000 ft and visibility above 5 statute miles (about 8 km). MVFR, IFR and LIFR follow as either falls, with IFR below 1,000 ft or 3 miles and LIFR below 500 ft or 1 mile. It is a quick sort, not a rule. VFR minima for your flight depend on the airspace class, your height and your licence. See VFR weather minima under SERA.
What it does not do
- It does not fetch live reports. Get them from an official source or from the Weather panel of the VectorEFB app.
- It does not make the go or no-go decision. The prompts under Things to check are general reminders.
- It does not decode every national or military variation. Anything it cannot read is listed as not recognised.
- Wind direction in a METAR and a TAF is true, not magnetic. Runway headings are magnetic.
Where next
- The guide how to read a METAR and TAF, and the lesson on reading a METAR and TAF.
- The go or no-go weather decision.
- The other free calculators.
Back to the learning hub.