Airports in Romania · LRTR

LRTR Timișoara Traian Vuia International Airport: runways, frequencies and crosswind

Timișoara Traian Vuia International Airport is a large airport near Timişoara, Romania, at 348 ft (106 m). It has one runway (11/29), surface: concrete. LRTR has the 2nd longest runway of the 31 Romanian airfields with a runway in the data (11,483 ft, 3,500 m) and sits the 24th highest of 34 Romanian aerodromes with a stated elevation (348 ft).

Check the AIP and NOTAMs before flight. Data built 14 November 2026 from OurAirports, which is a volunteer database with no guarantee of accuracy. Runways, frequencies and elevations can be out of date. Not certified for navigation.

LRTR airport facts

ICAO
LRTR
IATA
TSR
Place
Timişoara, Romania
Elevation
348 ft / 106 m
Position
45° 48.59′ N
21° 20.27′ E
Runways
1: 11/29
Longest runway
11,483 ft / 3,500 m
Surfaces
concrete
Frequencies listed
3

Runways at LRTR

RunwayLengthWidthSurfaceLightsHeading from number (magnetic)Heading in data (true)
11 / 2911,483 ft (3,500 m)148 ft (45 m)concretemarked as lit110° / 290°110° / 290°

Magnetic headings are nominal, taken from the runway number. The true headings are the survey values in OurAirports, where given; they differ from the magnetic ones by the local magnetic variation. Lights are what the data says, not a statement that they are available.

Frequencies listed for LRTR

TypeName in dataMHz
APPTIMISOARA APP120.100
GNDTIMISOARA GND121.600
TWRTIMISOARA TWR120.100

From OurAirports. Frequencies change: confirm each one in the AIP before you use it.

Runway wind helper for LRTR

Enter the wind as given by ATIS or the tower (magnetic) to see the headwind, tailwind and crosswind for each runway end at LRTR. Runway headings come from the runway numbers. A METAR wind is true: correct it for variation first.

Enter the wind direction and speed to see each runway end.

Compare the result with the crosswind limit in your flight manual and your school’s rules. For the method see the crosswind component calculator.

Elevation and performance at LRTR

At 348 ft, a 30°C day with the altimeter at 1013 hPa gives a density altitude of about 2,231 ft, which is 1,883 ft above the field. On a 15°C day at 1013 hPa it is about 431 ft. Take-off and landing distances in your flight manual are worked from density altitude, so use the real temperature and QNH with the density altitude calculator.

LRTR is a low field, so density altitude is close to what you would meet at sea level in the same weather.

VFR briefing checklist for LRTR

Generic items worked out from the data for this field. They are a prompt for your own briefing, not the briefing itself.

  1. Check the current AIPOpen the AD 2 entry for LRTR in the Romanian AIP, via the ROMATSA AIS site or the EAD. This page is built from OurAirports data (built 14 November 2026) and does not state operating hours, circuit direction or circuit height, prior permission or fees.
  2. NOTAMs for LRTRRead the NOTAMs for LRTR and for every field on your route before you go: closed runways, work in progress and airspace restrictions are published there and not here.
  3. WeatherGet the METAR and TAF for LRTR. Weather is as old as its timestamp. Compare the wind with the runway helper above and with your own crosswind limit.
  4. Elevation and altimeterField elevation is 348 ft (106 m). Set the QNH, and check the altimeter reads close to 348 ft on the ground.
  5. Terrain and obstaclesAirfields within 40 nm of LRTR are at similar elevations (266 to 361 ft), but check the chart for the highest terrain and obstacles on your route and on the approach.
  6. Runway surfaceThe data lists concrete, so wet-runway and braking effects apply rather than soft ground.
  7. Runway lengthThe longest runway is 11,483 ft (3,500 m). Still compute take-off and landing distances for your aircraft and the day: a long runway is no substitute for the figures.
  8. Runway choiceThere is one runway (11/29), so the wind decides which end you use and a crosswind cannot be avoided by choosing another runway. Have an alternate in mind.
  9. Radio and joiningA tower frequency is listed. Expect to speak to the tower for entry and clearance, and read the AIP for the VFR arrival procedures and reporting points. The listed frequencies may be out of date.
  10. Larger aircraftLarge aircraft use LRTR. Allow for wake turbulence behind heavier traffic and expect to be fitted in around airline movements.
  11. AlternatesNearest fields with a runway in the data: LRAR 22 nm to the north; LRCB 30 nm to the north; LYKI 39 nm to the west. Pick the alternate for the weather and fuel on the day, not only the distance.

Nearby airports and alternates

ICAOAirfieldDistanceBearingLongest runway
LRARArad22 nm (41 km)352° true, north6,562 ft concrete
LRCBCharlie Bravo Șiria30 nm (55 km)022° true, north2,592 ft grass
LYKIKikinda (RS)39 nm (72 km)267° true, west2,953 ft grass
LYVRVršac (RS)40 nm (74 km)182° true, south3,280 ft asphalt
LRCSCaransebeş45 nm (83 km)121° true, south-east6,562 ft concrete

Great-circle distance and true bearing from LRTR, nearest first. Airfields with no runway in the data, heliports and air bases are not listed. Whether any of them is open to you, and when, is for the AIP and NOTAMs to say.

Plan a flight to LRTR

Open the VectorEFB app and search for LRTR to draw the route, check the legs and run the plan checks. The app is open to approved users while access is by request.

Related guides and tools

Source: OurAirports (public domain), data built 14 November 2026. Runway headings, distances, bearings and density altitude are calculated by VectorEFB. Operator website: www.aerotim.ro. Wikipedia. Back to airports in Romania or the learning hub.